英国GRIMM格林进口塑料离心泵概述：

          进口塑料离心泵系单吸直联式塑料离心泵，是一种小型塑料泵，产品结构较先进、体积小、重量轻、耗电省、耐酸碱、密封好、维修方便。广泛用于输送酸、碱、盐等腐蚀性液体上，化工、轻工、三废治理等理想产品。

英国GRIMM格林进口塑料离心泵结构与特点：

          进口塑料离心泵系列产品均采用机械密封，并引进国际先进工艺和技术配方，使用CFR-PP(增强聚丙烯)、改进ABS(工程塑料)作为泵的材质，在同系列的塑料泵产品中，充分显示了其结构先进、重量轻、体积小、寿命长等特点，广泛应用于化工，食品、制药、电镀、造纸、环保、水处理等部门，输送酸、碱、盐等腐蚀性液体。

英国GRIMM格林进口塑料离心泵技术参数：
流量：1～25m3/h
扬程：5～25m
吸程：3～6m

口径：进口直径：20～65mm
           出口直径：15～50mm

转速：2900r/min
功率：0.12～4kw

英国GRIMM格林进口塑料离心泵适用范围：
          广泛应用于化工，食品、制药、电镀、造纸、环保、水处理等部门，输送酸、碱、盐等腐蚀性液体。

UK GRIMM imported plastic centrifugal pump summary:

           imported plastic centrifugal pump is a single suction direct plastic centrifugal pump. It is a small plastic pump. The product structure is more advanced, small size, light weight, low power consumption, acid and alkali resistance, good sealing and convenient maintenance. Widely used in the transportation of acid, alkali, salt and other corrosive liquids, chemical, light industry, three waste treatment and other ideal products.

UK GRIMM imported plastic centrifugal pump structure and characteristics:

           Plastic centrifugal pump series products adopt the mechanical seal, and the introduction of international advanced technology and technology formula, using CFR-PP (reinforced polypropylene), improved ABS (engineering plastics) as the material in the plastic pump, pump the same series of products, fully demonstrated the characteristics of advanced structure, light weight, small volume, long service life etc. and widely used in chemical, pharmaceutical, food, papermaking, electroplating, environmental protection, water treatment and other departments, transport of acid and alkali, salt and other corrosive liquids.

UK GRIMM imported plastic centrifugal pump technical parameter:

Flow rate: 1 ~ 25m3/h

Lift: 5 ~ 25m

Suction range: 3 ~ 6M

Caliber: inlet diameter: 20 ~ 65mm

Outlet diameter: 15 ~ 50mm

Speed: 2900r/min

Power: 0.12 ~ 4kw

UK GRIMM imported plastic centrifugal pump scope of application:

        Widely used in chemical, food, pharmaceutical, electroplating, paper making, environmental protection, water treatment and other departments to transport acid, alkali, salt and other corrosive liquid.